Loop Attachment & Detachment; Attach The Loops (5 Steps); Detach The Loops (2 Steps); W A R N I N G - Arjo Bariatric Slings Bedienungsanleitung

L oop A t t ach me n t & D e t ach me n t
4 p oi n t s p re ad e r b ar: First attach the shoulder
loops in the front hooks. Then attach the leg loops in
the back hooks.

W A R N I N G

D o n ot cros s t h e s h ou l d e r s t rap s .
A t t ach t h e L oop s ( 5 S t e p s )
W A R N I N G
E N
U s e t h e s ame l oop l e n g t h f or t h e s h ou l d e r
s t rap s an d t h e s ame l e n g t h f or t h e l e g
s t rap s .
1. Place the loop over the spring loaded latch (A ).
( S e e F i g . 3 )
2. Pull the loop down to force the latch to open.
3. Make sure that the spring loaded latch closes
completely with the loop inside. ( S e e F i g . 3 )
4. Make sure that the latch is moving freely.
5. Make sure loops and straps are not twisted.
F i g . 3
NOTE
The loops lengths on the straps are used to
adjust the patient' s position and comfort.
• Loops closer to the shoulders;
• Loops further aw ay from the shoulders;
• Loops closer to the legs;
• Loops further aw ay from legs;
D e t ach t h e L oop s ( 2 s t e p s )
Make sure that the weight of the patient is taken up by
the receiving surface before removing the loop.
M e t h od 1
1. Press the spring loaded latch open.
2. Remove the loop.
M e t h od 2
1. Pull one side of the loop over the hook and spring
2. Pull down the loop. ( S e e F i g . 5 )
F i g . 4
A
8
more forw ard position
more reclined position
raised legs/bottom
low ered legs/bottom
loaded latch.( S e e F i g . 4 )
F i g . 5