Detection Range - Waeco MagicWatch MWE9004 Montage- Und Bedienungsanleitung

Detection range

The complete circuit diagram MWE9004 can be found in fig. b.
No. Designation
1 Control electronics
2 Reversing light
3 Black/blue cable: connection to the reversing light
4 Brown cable: connection to earth
Yellow cable from the loudspeaker: connection to slot 15 in the plug of the control
5
electronics
Blue cable from the loudspeaker: connection to slot 3 in the plug of the control
6
electronics
7 Red/grey cable: connection to the radio's mute connection (optional)
8 Sensors
7 Detection range
See fig. e
The detection range of the parking aid is divided into four zones at the rear
and into three zones in front.
 Zone 1 (rear only)
This zone is the first limit range. Small objects or those with poor reflective
characteristics may not be detected here.
 Zone 2
Nearly all objects are displayed in this zone.
 Zone 3
Nearly all objects in this zone are displayed, however objects may only
appear in the sensors' blind spot, or not be detected at all due to their
consistency or small size.
 Stop zone (4)
If there are objects in this zone, the parking aid emits a continuous tone
warning you to stop.
Nearly all objects in this zone are displayed, however objects may only
appear in the sensors' blind spot or not be detected at all due to their
consistency or small size.
The distance at which the parking aid signals to stop is adjustable in
stages.
Displaying fixed objects, such as a trailer hitch, can be suppressed.
26
MagicWatch MWE9004, 9008
EN