Fitting The Parking Aid - Waeco MagicWatch MWE9004 Montage- Und Bedienungsanleitung

Fitting the parking aid

5 Fitting the parking aid
See fig. 7 to fig. 0
A
NOTICE! Risk of malfunction
Align and attach the sensor holders correctly. Otherwise the cor-
rect function of the parking aid cannot be ensured.
The sensor holders must be attached with the retaining tabs point-
ing up and down.
A
NOTICE! Risk of paint damage!
 The ambient temperature may not fall below 18 °C when
punching or drilling.
 We recommend using a punching tool.
Supplementary to fig. 7 A
➤ Drill the holes according to the selected sensor holder.
Supplementary to fig. 7 B
➤ Make sure that you do not tilt the punching tool when operating.
Supplementary to fig. 8
➤ Clean the adhesive surface on the inner side of the bumper with a primer.
24
MagicWatch MWE9004, 9008
EN