Technical Data; Range Of Use - T.I.P. HWW 6000 EPF Original-Gebrauchsanweisung

2. Technical Data

Model
Mains voltage / frequency
Nominal performance
Protection type
Suction port
Pressure port
Max. flow rate (Q )
max
Min. flow rate
Max. pressure
Max. delivery height (H
Max. suction height
Max. self priming height
Volume tank
Max. size of the solids being pumped
Max. permissible operating pressure
Min. ambient temperature
Min. fluid temperature
Max. fluid temperature (Tmax)
Max. cut-in frequency in one hour
Length of connection cable
Cable type
Weight (net)
Guaranteed sound power level (LWA) 2)
Measured sound power level (LWA) 2)
Sound pressure level (LpA) 2)
Dimensions (L x D x H)
Article no.
1)
The values were determined with free, unreduced in- an outlet.
2) Noise emission values obtained according to the EN 12639 regulation. Measurement method ac-
cording to EN ISO 3744.

3. Range of use

Booster sets from T.I.P. are self-priming electrical pumps with a mechanical or
electronic pump control system for automated operation. These high-quality
products with their convincing performance data were developed for the various
purposes involved with irrigation, domestic water supply and pressure boosting,
as well as for discharging water at a constant pressure. The devices are suitable
for pumping clean, clear water.
The typical areas of use of booster sets include: Automatic domestic water
supply with grey water from wells and cisterns, automated irrigation of gardens
and garden beds and sprinkling,
22
1)
)
1)
max
Translation of original operating instructions
HWW 6000 EPF
230 V~ 50 Hz
1,500 Watt
IPX4
39.59 mm (1 ¼" female)
30.93 mm (1 " female)
6,000 l/h
250 l/h
4.5 bar
45 m
9 m
7 m
22 L
3 mm
6 bar
5 °C
2 °C
35 °C
40, evenly distributed
1.5 m
H07RN-F
ca. 15.4 kg
84 dB (A)
82.1 dB (A)
68.9 dB (A)
48.5 x 27.0 x 63.0 cm
30199
3