Menu structure
Mode
DMX mode
Preset colors
Automatic mode
Sound control
Running speed in
automatic and sound-
controlled mode
Microphone sensitivity
for sound control
Dimmer
Sound control
silent scene
Laser
Behavior in case of
missing DMX signal
Slave mode
IR remote control
Version
Stand-alone operation
Preset colors
In the Stat mode the device will constantly emit one of 15 preset colors.
1
Press the MENU button so many times until Stat is indicated in the display. Confirm with the ENTER
button.
2
Use the buttons UP and DOWN to set the desired color (01~15). Confirm with the ENTER button.
Automatic mode
In automatic mode, 7 show programs are available that run at an adjustable speed.
1
Press the MENU button so many times until Auto is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (Au01~Au07). Confirm with
the ENTER button.
2
Press the MENU button so many times until SPEE is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from SP 1 (slow) to
SP 9 (fast). Confirm with the ENTER button.
Display
25CH
d001-512
Addr
13CH
d001-512
3CH
d001-512
Stat
01 – 15
Auto
Au 01 – Au 07
Soun
So 01 – So 07
SPEE
SP 01 – SP 09
SEnS
SE 01 – SE 09
diMM
dI 01-dI 09
on
SILE
oFF
on
LASE
oFF
bLac
Hold
FuLL
Lost
Stat
Auto
SLAV
SLAU
on
InFr
oFF
V1.0
V1.0
31/40
Function
25-channel mode and start address
13-channel mode and start address
3-channel mode and start address
Constant lighting in one of 15 colors
Automatic programs
Sound-controlled programs
Program running speed, slow > fast
Microphone sensitivity, low > high
Total brightness, dark > bright
LEDs off if there is no music signal
LEDs remain on if there is no music signal
Enable Laser
Disenable Laser
LEDs switched off
Most recent DMX value is held
All LEDs 100% on
Pre-selected static color 01-15
Pre-selected auto program 01-07
Slave mode
IR remote control on
IR remote control off
Current software version V1.0
00132693, Version 1.0