OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. You can move through the main menu by turning the encoder. Press the encoder to select the desired
menu item. You can change the selection by turning the encoder. Confirm each change by pressing the
encoder. The respective mode can be exited via the "Quit" menu item. The respective functions are
described below. All settings remain stored even if the device is disconnected from the mains. The device
can be operated either in standalone mode via the encoder, additional shortcut keys or in DMX-controlled
mode via a commercially available DMX controller.
Encoder:
Selects the operating mode
Activates a value to be modified or saves a value when modifying
Shortcut buttons:
CCT
Quickly enter the color temperature adjustment mode
FX
Quickly enter the special effect adjustment mode
DMX
Quickly enter the DMX setting mode
BLACKOUT
Light OFF/Light ON
Menu structure
Disply
DMX Address
CCT
HSI
RGB
Effect
Effect
A001
Setting the DMX-Starting address A001 – A512
ColorTemp
Setting the color temperature 1800K – 10000K
Intensity
Setting the total brightness 000 – 255
Strobe
Setting the strobe speed 000 – 012 (increasing)
Hue
Setting the hue 000 – 255
Saturation
Setting the saturation 000 – 255
Intensity
Setting the brightness 000 – 255
Strobe
Setting the strobe speed 000 – 012 (increasing)
Setting the dimmer intensity of the LED colors – color
mixing
0000 – 255 (increasing)
Red
Dimmer intensity of the red LED colors 000 – 255
Green
Dimmer intensity of green LED colors 000 – 255
Blue
Dimmer intensity of blue LED colors 000 – 255
Amber
Dimmer intensity of amber LED colors 000 – 255
Lemon
Dimmer intensity of lemon LED colors 000 – 255
Cyan
Dimmer intensity of cyan LED colors 000 – 255
Intensity
Setting the total brightness 000 – 255
Strobe
Setting the strobe speed 000 – 012 (increasing)
Effect
17 Special effects
Effect.Clouds
Function
26/36
00146057, Version 1.1