Equipment And Accessories - eta 0517 Bedienungsanleitung

Always disconnect the appliance from power by unplugging
–
the power cord from the electrical socket, if the appliance is left
unattended and before assembly, disassembly or cleaning.
Never use the appliance if the power cord or power plug are
–
damaged, if the appliance is not correctly operating or if it has
fallen on the floor and been damaged, or if it has fallen into water.
– Do not apply force to unwind the cord beyond the red mark.
– Do not unplug the power plug by pulling the power cord or the vacuum cleaner unit.
– When winding the cord, hold the plug to prevent lashing of the cord around and to
prevent possible injury.
– The power cord must not be damaged with sharp or hot objects, open fire, it must
not be sunk into water or bent over sharp edges.
– Check the condition of the power cord of the appliance regularly.
For trouble-free operation of the vacuum cleaner, please use the
tested micro-filters recommended by the producer.
II. EQUIPMENT AND ACCESSORIES
A – vacuum cleaner (Fig. 1, 2a, 3)
A1 – ON/OFF (
A2 – power cord winding button
A3 – knob for suction power regulation
A4 – suction vent
A5 – handle
A6 – container lock button
A7 – depression for attachment of accessories
A8 – power cord
A9 – rear wheels
A10 – exhaust grid
A11 – output HEPA filter
B – dust container (Fig. 4)
B1 – holder
B2 – cover lock button
B3 – cover
B4 – suction filter 1
B5 – suction filter 2
B6 – separator
B7 – foam micro-filter
C – accessories (Fig. 1)
C1a – floor nozzle
C1b – floor nozzle (2 vacuum cleaning
modes)
C2 – small turbo brush
C3 – turbo brush
) button
C4a – parquet nozzle
C4b – parquet nozzle
(PREMIUM CARE 360°)
C5 – nozzle for vacuuming of animal hair
C6 – upholstery nozzle
C7 – brush
C8 – crevice nozzle
C9 – long crevice nozzle
C10 – suction hose
C11 – telescopic suction tube
C12 – telescopic suction tube locking
C13 – mechanical suction power regulator
D – control panel (Fig. 2b, 5) (ETA4517)
D1 – ON/OFF (
D2 – "+" button for suction power setting
D3 – "-" button for suction power setting
D4 – LED light panel
E – handle with remote control (Fig. 1, 6)
(ETA4517)
E1 – ON/OFF (
E2 – "+" button for suction power setting
E3 – "-" button for suction power setting
E4 – squeeze signal lights
E5 – battery compartment cover
E6 – battery compartment
25 / 50
EN
) button
) button