Equipment And Accessories (Fig. 1); Vacuum Cleaner Preparation - eta DASTY Bedienungsanleitung

For trouble-free operation of the vacuum cleaner, please use the
tested micro-filters recommended by the producer.
II. EQUIPMENT AND ACCESSORIES (Fig. 1)
A – vacuum cleaner
A1 – ON/OFF button
A2 – operation signal lights and charging
lights
A3 – handle
B – dust container
B1 – container lock button
B2 – HEPA filter
B3 – separator
C – accessories
C1 – crevice nozzle
C2 – brush
D – extension adapter
D1 – ON/OFF button.
D2 – suction power control
D3 – foldable part with handle
D4 – foldable part lock button
D5 – vacuum cleaner lid lock button
III. VACUUM CLEANER PREPARATION
Remove all packing material, take out the vacuum cleaner and the accessories. Remove all
possible adhesion foils, stick-on labels or paper from the appliance.
VACUUM CLEANER ASSEMBLY
When assembling the vacuum cleaner, follow the procedure indicated in Fig. 1. Select
appropriate accessories (Fig. 6) depending on the required use (hand vacuum cleaner / stick
vacuum cleaner). For disassembly, proceed the other way round and release the locks.
CHARGING THE ACCUMULATOR
Turn the vacuum cleaner off prior to charging! Place the vacuum cleaner in the
extension attachment and then in the charging base F. Connect the adaptor to the
charging connector F4 and plug it to the mains. The accumulator has to be charged at
least for 8 hours prior to the first use. After that, the standard charging time is approx.
6 hours. The status and progress of charging is indicated by indicator A2.
E – floor nozzle with rotation brush
E1 – floor nozzle lock button
E2 – removable brush
E3 – brush lock
E4 – LEDs illuminating the space in front of
the vacuum cleaner
F – charging stand
F1 – lower part
F2 – space for small accessories
(crevice nozzle, brush)
F3 – support
F4 – charging port
F5 – support lid lock button
F6 – hole for fixing on the wall
G – adapter
H – screws
I – wall plugs
25 / 51
GB