Herunterladen Inhalt Inhalt Diese Seite drucken

Equipment And Accessories (Fig. 1); Vacuum Cleaner Preparation - eta Verto Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Verto:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35
– The vacuum cleaner is not suitable for vacuuming substances that can harm human health.
– The appliance must not be used in damp or wet environment and in any environment
with the danger of fire or explosion (spaces where chemicals, fuels, oils, gases,
paints and other flammable or volatile materials are stored).
– WARNING: There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
ACCESSORIES AND ASSEMBLY OF THE APPLIANCE:
– Do not put the suction hole of the vacuum cleaner or the accessories close to your
eyes and ears and do not insert them into any body orifices!
– Install the holder, the vacuum cleaner and the appliance within sufficient distance from
flammable objects (e.g. curtains, drapes, wood, etc.), heat sources (e.g. oven, stove,
etc.) and wet surfaces (e.g. sinks, wash–basins etc.).
– Only use this appliance for the purpose it was designed for, as specified in this manual.
Never use the appliance for any other purpose.
ADAPTER:
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
– If you need to use an extension cord for justified reasons, it must be undamaged and
comply with the applicable standards.
– Check the condition of the power cord of the adapter regularly.
For trouble-free operation of the vacuum cleaner, please use the
tested micro-filters recommended by the producer.
II. EQUIPMENT AND ACCESSORIES (Fig. 1)
A – vacuum cleaner
A1 – ON/OFF button
A2 – charging indicator
A3 – container lock button
A4 – handle
B – dust container
B1 – HEPA filter
B2 – separator
III. VACUUM CLEANER PREPARATION
Remove all packing material, take out the vacuum cleaner and the accessories. Remove all
possible adhesion foils, stick-on labels or paper from the appliance.
VACUUM CLEANER ASSEMBLY
When assembling the vacuum cleaner, follow the procedure indicated in Fig. 1. In
accordance with the required use, choose suitable accessories (C1, C2) or use the
vacuum cleaner without accessories C (Fig. 3).
C – accessories
C1 – crevice nozzle
C2 – brush
D – charging stand
D1 – adapter
D2 – opening for mounting on the wall
19 / 39
GB

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Verto ii

Inhaltsverzeichnis