4.2 Removing of the oven door
1. Open the door and push the safety
catch upwards.
2. Close the door slightly.
3. Lift the door and pull it towards
your direction.
4. To reassemble proceed in reverse
order.
5. Check that the groove of the hinge
bracket is positioned properly in its
guide.
6. After reassembling the door close the safety catch carefully.
7. If the safety catch is not closed properly you will damage the hinges when
closing the door.
4.3 Removing of the glass panel
1. Unscrew and unfasten the bracket
latch that is in the corner at the top
of the door.
2. Take out the glass from the second
blocking mechanism and remove it.
3. After cleaning, insert and block the glass panel.
4. Screw in the blocking mechanism..
4.4 Trouble shooting
Emergency measures:
1. Switch off the entire appliance.
2. Disconnect the appliance from the mains (fuse box of your household power
supply).
3. Contact your aftersales service.
Check the schedule below before you contact your aftersales service.
51