7.5 Removing / installing of the oven door
1. Open the door and push the safety catches of
the two hinges upwards (s. fig. on the right).
2. Close the door slightly: 15° (s. fig. on the
right).
3. Lift the door and pull it towards your
direction carefully.
4. To reassemble proceed in reverse order.
5. Check that the groove of the hinge bracket is positioned properly in its guide.
6. After reassembling the door close the safety catch carefully.
7. If the safety catch is not closed properly, you will damage the hinges when
closing the door.
7.6 Removing / installing of the telescopic slides
H
OW TO REMOVE THE TELESCOPIC SLIDES FROM THE
1. Press the slide hooks of the telescopic slide at
the points marked «
from the side rack (see fig. on the right).
2. Then turn the telescopic slide anti-clockwise
slightly (s. fig. on the right, arrow).
H
OW TO REMOVE
LEFT SIDE OF THE OVEN CAVITY
A
» until it is released
/
INSTALL THE OVEN DOOR
~
~
123