Removing / Installing Of The Oven Door - Pkm EBO 9.5 Bedienungsanleitung

4. Unscrew the illuminant from the socket (s. fig. below) and replace it with a high
temperature illuminant (300 °C) of the same type: Voltage 230 V / Power 25
W. Do not use any other type of illuminant.
5. Screw the new illuminant in. Check its proper position in the socket.
6. Replace the lamp cover.
7. Remove the dishcloth and switch on the corresponding fuse in the fuse box
of your household power supply again.
According to the EU regulation No. 244/2009, your appliance is classified as a
household appliance in accordance with the eco-design requirements for non-
directional household lamps. This means that illuminants, which are used in
household appliances, must not be used to illuminate domestic establishments.

5.4 Removing / installing of the oven door

1. Open the door and push the safety catches
of the two hinges upwards (s. fig. on the
right).
H
OW TO REMOVE
/
INSTALL THE OVEN DOOR
87