1.2 Safety instructions
1. The appliance must be connected to the mains by a qualified
professional, who is familiar with and adheres to the local
requirements and supplementary regulations of your energy supplier.
2. All electrical work must be carried out by a qualified professional. Do
not modify the energy supply. The connection must be carried out in
accordance with the current local and legal regulations
3. Do not connect the appliance to the mains if the appliance itself or
the power cord or the plug are visibly damaged.
4. Never try to repair the appliance yourself. Repairs carried out by
unauthorized persons can cause serious damage. If the appliance
does not operate properly, please contact the shop you purchased the
appliance at. Original spare parts should be used only.
5. When the power cord is damaged, it must be replaced by the
manufacturer or an authorized aftersales service or a qualified
professional only.
1. Disconnect the appliance from the mains before you clean or maintain
it.
2. The appliance must always be grounded and protected corresponding
to the requirements of your local energy supplier. The main current
circuit must be equipped with a safety shut-down device.
3. All modifications to the electrical mains to enable the installation of the
appliance must be performed by a qualified professional.
4. In case of an event caused by a technical malfunction, disconnect the
appliance from the mains. Report the malfunction to your service
centre so it can be repaired.
5. If the cooking zones are cracked or damaged in any way, switch off
the appliance immediately and disconnect it from the mains (fuse box).
Risk of electric shock.
DANGER!
WARNING!
34