Items Supplied; Transport / Storage; Product Description; Before Initial Operation - Cleco NeoTek 30 Serie Bedienungsanleitung

1
1
EN
- Inline tools used above 4 Nm.
EN
- Pistol tools used above 10 Nm.
- Angle tools used above 60 Nm.
d) NEVER rest your hand on the reaction bar when
working.
e) Check that the suspension bail is properly secured to
the balancer.
► Do not exceed total length of tool cable:
- Primary controller mPro(...)GCD-(...) max. 50 m.
- Secondary controller mPro-400GCD-S(...) max.
30 m
► When using tool Series 70, note the following:
- Up to 3 m tool cable can be used with a maxi-
mum of 25 m Extenstion Cable.
Up to 6 m tool cable can be used with a maxi-
-
mum of 20 m Extenstion Cable.
Tool cables over 6 m must not be extended.
-
Personal Protective Equipment
► When working with rotating parts, it is not permitted to
wear gloves.
Recommendation: Freely rotating u-GUARD pro-

tected fastening tools from APEX.
► Wear a hair net, if necessary.
Power Tool Use and Care
► Only use bits or sockets designed for industrial use
with machine-controlled tools.
► Make sure that the bit or socket is securely inserted.
► Do not attach the bit or socket to the screw head at an
angle.
► Inspect the bit or socket for visible damage and
cracks. Replace damaged screw bits immediately.
► Do not open the battery.
3

Items Supplied

Correct tool
•
Instruction manual
•
EU Declaration of conformity
•
Warranty
•
4

Transport / Storage

► Transport or store in the original packaging. The
packaging is recyclable.
► If the packaging is damaged, check the product for
visible damage. Inform the transporter, if necessary,
your Sales & Service Center.
5

Product Description

Tool
Quarter turn tool cable connection
•
Configurable LED light rings
•
Clockwise/counterclockwise rotation
•
• Programmable fastening parameters
• CW / CCW indicator lights
8
7
7
Abb. 1-1: Functional elements 30/50/70 Series
1 Tool cable connection
2 Start switch
3 Configurable multi-function buttons
4 Configurable LED light rings
5 Motor assembly
6 Gearing
7 Attachment
8 Two-position start switch
LED Display
The LED light ring is customizable via the controller user
interface.
Default Settings
LED Blue
Light
De- Tool Run-
scrip- ning
tion
6

Before Initial Operation

Connect tool
► Connect the tool via tool cable to the controller (see
Quick Installation Guide).
TM12-1109 | 2022-09
6 5 4 3
2
6 5 4 3
2
7
6 5
4
8
Green Red
OK run- NOK run-
down down
Apex Tool Group
1
1
3
1
Yellow
User de-
fined