Inhaltsverzeichnis
Werbung
▪ Always turn off the biscuit jointer first during adjustment, when changing accessories,
when not in use and after work has been completed, and then unplug it.
▪ Keep the vents clean and free of foreign objects. Make sure that dust particles cannot
penetrate the mechanical parts.
▪ Do not use a damaged milling blade. Swap it out for a new one.
▪ Do not machine workpieces that are too small to be securely locked.
▪ Do not open the device or make your own repair attempts. Contact a professional or
our customer support. Use only original spare parts.
Residual risk
▪ Even if you usethe biscuit jointer as intended and observe all safety instructions,
residual risks always remain. The following hazards may occur in connection with the
design and design of the hammer drill:
- Lung damage if no suitable dust mask is worn.
- Hearing damage if appropriate hearing protection is not worn.
- Eye injuries caused by flying away materials or material parts, if no suitable eye
protection is worn.
▪ Damage to health resulting from hand-arm vibrations if the hammer drill is used for an
extended period of time or if the biscuit jointer is not properly guided and maintained.
▪ Risk of injury if long hair, wide garments or jewelry are detected by rotating machine
parts.
▪ Reduce the residual risk by using the biscuit jointer carefully and carefully and following
all safety instructions and instructions.
16
Werbung
Inhaltsverzeichnis
