Startup Wizard 1/2 - AEG FRTD 903 TC Benutzerhandbuch

Startup Wizard 1/2

Page 5
© 2016 OJ Electronics A/S
All manuals and user guides at all-guides.com
When the system has been installed and turned on for the first time, or after you
have performed a factory reset, you must set Region, Language, Date, Time and
Floor Type .
The thermostat will automatically guide you through the process .
1 . Region – set the time region in which the thermostat is located .
This parameter is used, for example, to ensure correct use of Daylight Saving
Time .
Tap the time region you are in .
Confirm with "√"
2 . Language – set the language to be used on the thermostat display .
Tap the language you prefer . Confirm with "√" .
3 . Date – set the current date .
Tap the parameter you want to change . Use the "up arrow" or "Down arrow"
button to set the day, month and year .
Confirm each setting with "√" .
4 . Time – set the current time .
Tap the parameter you want to change . Use the "up arrow" or "Down arrow"
button to set the hours and minutes .
Confirm each setting with "√" .