Herunterladen Inhalt Inhalt Diese Seite drucken

Room Sensor Calibration - AEG FRTD 903 TC Benutzerhandbuch

Vorschau ausblenden Andere Handbücher für FRTD 903 TC:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Room Sensor Calibration

Page 50
© 2016 OJ Electronics A/S
All manuals and user guides at all-guides.com
This option allows you to calibrate the room sensor .
You should calibrate the sensor if the temperature reading differs from the actual
room temperature .
You can calibrate the sensor with +/- 10°C in steps of 0.5°C in the following way:
1 . Tap the "Menu" button on the home screen .
2 . Then tap the "engineer settings" button .
3 . Scroll down and tap the "Room sensor Calibration" button .
4 . Confirm that you want to calibrate the sensor with "√" or cancel with "X" .
5 . If "√" is chosen, you must then offset the thermostat to reflect the room
temperature actually measured .
6 . Use the "up arrow" or "Down arrow" button to set the measured room
temperature .
7 . Confirm the value with "√" . A confirmation screen will be displayed briefly .
8 . The thermostat will automatically return to "engineer settings" .

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis