Safety Instructions; General Power Tool Safety Warnings - Parkside PFS 710 E4 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Noise emission value
The measured values have been determined in
accordance with EN 62841 . The A-rated noise
level of the power tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 62841:
Cutting boards
Handle (max.):
Hand/arm vibration
Uncertainty
Cutting wooden beams
Handle (max.):
Hand/arm vibration
Uncertainty
m
WARNING!
Wear ear protection!
NOTE
The declared vibration total values and
u
the declared noise emission values have
been measured in accordance with a
standard test method and may be used for
comparing one tool with another .
The declared total vibration values and the
u
declared noise emission values may also
be used for a preliminary assessment of
exposure .
8 GB
L : 88 .4 dB(A)
pA
K : 3 dB
pA
L : 99 .4 dB(A)
WA
K : 3 dB
WA
a : 11 .696 m/s
2
h,B
K: : 1 .5 m/s
2
a : 12 .131 m/s
2
h,WB
K : 1 .5 m/s
2
m
WARNING!
The vibration and noise emissions during
u
actual use of the power tool can differ
from the declared values depending on
the manner in which the tool is used,
especially what kind of workpiece is
processed .
Try to minimise exposure to vibration and
noise . Examples of measures to reduce
vibration include wearing gloves when
using the tool and limiting working time . All
parts of the operating cycle must be taken
into account (e .g . times when the power
tool is switched off and when it is running
idle in addition to the trigger time) .

Safety instructions

˜ General power tool safety
warnings
m
WARNING!
Read all safety warnings,
u
instructions, illustrations and
specifications provided with
this power tool. Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury .