Cleaning And Care; Cleaning; Maintenance; Repair - Parkside PFS 710 E4 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

˜ Cleaning and care
m
WARNING!
Always switch the product off and
let the product cool down before
performing inspection, maintenance
and cleaning work!
˜ Cleaning
Never allow fluids to get into the product .
¾
The product must always be kept clean, dry
¾
and free from oil or grease . Remove debris
from it after each use and before storage .
Regular and proper cleaning will help ensure
¾
safe use and prolong the life of the product .
Clean the product with a dry cloth . Use a
¾
soft brush for areas that are hard to reach .
In particular clean the air vents after every
¾
use with a cloth and soft brush .
The vents must always be clear .
¾
NOTE
Do not use chemical, alkaline, abrasive
u
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces .
18 GB
˜ Maintenance
The product is maintenance-free .
¾
Before and after each use, check the product
¾
and accessories (e .g . saw blades) for wear
and damage . If required, exchange them
for new ones as described in this instruction
manual .
Observe the technical requirements
(see "Technical data") .
Check covers and safety devices for
¾
damages and correct installation . Replace as
necessary .
Replace a blunt or bent saw blade or one
¾
which has been damaged in some other
way .
˜ Repair
This product does not contain any parts that can
be repaired by the user . Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired .
˜ Storage
Clean the product as described above .
¾
Store the product and its accessories in a
¾
dark, dry, frost-free, well-ventilated place .
Always store the product in a place that is
¾
inaccessible to children .
Store the product in its carrying case 17 .
¾