Westfalia 31 07 14 Bedienungsanleitung Seite 17

Assembly and Using
Fix the pusher (8) with the cross slide (40) by using two M6 screws (16) and
two washers (30). Tighten the screws.
For mounting the saw blade holder use both short M6 screws (18).
For very small saw blade it may be useful to mount the saw blade holder (7)
sideways.
Small Saw Blades
Place the saw blade on the saw blade
holder (7), than the centring cone (6) with
the pointed side first into the opening of
the saw blade.
Place the washer (29), followed by the
tension spring (14), another washer (30)
and the large tooth lock washer (25). Fix
the components with the wing screw (12).
12