1 Insert a new rubber roller.
Top
Bottom
Cleaning inside the Slide Carrier
Cleaning the Cabinet
3
Insert a new rubber roller and close the lid.
Make sure the top and bottom of the rubber roller are positioned
correctly.
2 Insert the shaft into the center of the rubber
roller and turn it a little to drop in the slit on
the base.
Shaft
For more replacement rubber rollers, consult your authorized Sony dealer.
Inside the slide carrier, there are 15 rollers (shaded in the following
figure). Press the tab to open the carrier and wipe the rollers with a cloth
slightly moistened with water.
Roller (× 15)
When the cabinet becomes dirty, wipe it with a cloth moistened with water
or neutral detergent dissolved in water. Do not use benzene, alcohol,
thinner or chemical cloth as these may damage the finish.
3 Close the lid.
Press the tab to open.
13
(GB)