Maintenance; Cleaning And Replacing The Rubber Roller Of The Auto Slide Feeder - Sony UYA-S290SF Bedienungsanleitung

Maintenance

Cleaning and Replacing the Rubber Roller of the Auto Slide Feeder

Cleaning the rubber roller
Replacing the rubber roller
12
(GB)
If the rubber roller of the auto slide feeder is dirty, slides may clog easily.
Clean the rubber roller regularly with a cloth moistened with water or
alcohol.
Frequent cleaning is required, especially when you use paper slide mounts.
For how to remove and replace the rubber roller, see "Replacing the rubber
roller."
When the rubber roller wears and the blue portion appears, replace it with
the supplied new rubber roller.
1
Remove all slides from the auto slide feeder, and lock the stoppers for
the holder for prescanning and the holder for scanning.
2
Remove the old rubber roller.
1 Open the lid.
While pressing up the tab,
move the stopper to lock.
2 Lift the shaft using
3 Remove the
rubber roller.
the tab on the rear
of the lid.