Auto Focus; Prescanning/Scanning - Sony UYA-S290SF Bedienungsanleitung

Auto Focus

Prescanning/Scanning

Marker
1 While pressing up the tab, move
the stopper to lock.
Only first slide: Adjusts the focus only for the first slide set on the auto
slide feeder. The other slides are prescanned and scanned with the same
focus conditions adjusted for the first slide. Normally use this mode.
All slides: Adjusts the focus for each slide set on the auto slide feeder.
Use this mode when you want to adjust the focus precisely for every slide.
1
Set the Mode and Auto Focus on the Feeder window.
For details, see "Setting on the Feeder Window" on page 8(GB).
2
Insert the slides to be prescanned into the holder for prescanning on the
auto slide feeder.
You can insert slides until they reach the marker on the side. When
you have set "Mode" on the Feeder window to "Prescan all slides (50
slides max)," however, up to 50 slides can be inserted.
2 Insert a slide with the emulsion side
facing you and the picture sidelong.
This way Not this way
3
Click the Preview button on the preview window.
The slides on the auto slide feeder are automatically fed into the
carrier, prescanned and ejected to the holder for scanning.
When you have set "Mode" to "Prescan only first slide (No limit),"
only the first slide is prescanned and previewed on the window.
When you have set "Mode" to "Prescan all slides (50 slides max)," all
the slides on the auto slide feeder are prescanned and previewed on the
screen.
Notes
• Do not change the order of the slides ejected to the holder for
scanning, as the film scanner scans the slides in the same order as that
of prescanning.
• The position of the prescanned/scanned image may shift horizontally
and/or vertically depending on the slide mount.
Holder for scanning
3 While pressing up the tab,
move the stopper to fix the
slides.
(continued)
9
(GB)