Mounting The Auto Slide Feeder On The Film; Scanner - Sony UYA-S290SF Bedienungsanleitung

Mounting the Auto Slide Feeder on the Film

Scanner

6
(GB)
When you want to prescan/scan multiple slides continuously, mount the
supplied auto slide feeder on the film scanner.
Note
The mounting should be performed on a rigid, flat surface such as on a
desk, as the screw on the auto slide feeder cannot support the weight of the
auto slide feeder.
Install the film scanner on a base which covers the auto slide feeder.
1
Remove the side panel of the film scanner and the cover of the slide
feeder connector.
2
Mount the auto slide feeder on the film scanner.
Insert the two projections on the rear of the auto slide feeder into the
slits on the film scanner, and the connector to the slide feeder
connector.
For easier positioning, place the auto slide feeder parallel to the side of
the film scanner, then fit the square projected part of the auto slide
feeder to the film scanner as illustrated.
Insert the projections.
Insert the
connector.