Device Description; Light Box - Bosch HTD 6 Serie Originalbetriebsanleitung

3.4

Device description

3.4.1 Summary
The headlight tester is suitable for checking all types
of headlamps on motorcycles, motor vehicles and
commercial vehicles in general use. The device can be
moved on rubber wheels for mobile applications or
used as a fixed installation (sideways movement on
rails). Fig. 1 shows the principal components.
Fig. 1: Components
1 Alignment laser
2 Control panel with LCD

3 Light box

4 Column
5 Trolley
6 Handle on the column
7 Handle
R
Alignment laser:
For alignment of the device with the vehicle.
R
Control panel:
Contains the controls and an LCD.
R
Light box:
Mounted on the column; height can be adjusted with
one hand.
R
Column:
Can be turned through approx. 30°, for alignment
with the vehicle. The column is provided with a
centimetre scale for exact positioning of the light
box with respect to the headlamp. A counterweight
is attached to a rope in the column (for adjustment
of light box height).
R
Trolley:
For moving the device. Three of the four wheels are
height-adjustable.
Robert Bosch GmbH
Product description | HTD 6xx | 21
3.4.2 Light box
The light box contains the components for checking
and setting vehicle headlamps.
Fig. 2: Light box
1 Bolt for securing control panel
2 Control panel
3 Spirit level for horizontal alignment
4 Sliding block for height adjustment
5 Graduated scale
6 Serial interface
7 Jack for battery charger
8 Scale ring for angle of inclination
9 Optional: Printer
The control panel is fixed in position by means of a bolt
and can be turned through 180° if required.
The light box contains a laser unit for finding the centre
of the headlamp. A laser cross is projected onto the
headlamp for this purpose.
en
|
1 692 104 610 2015-01-14