Using Measured Values; Display Actual Measured Values; Read Out And Display Measured Values; Export Measured Values - Endress+Hauser Minilog B RDL10 Version II Bedienungsanleitung

9.Using measured values

9. Using measured values

9.1 Display actual measured values

In order to display the actual measured values on-line connect
the data-logger to the PC using the RS 232 serial interface
cable.
Start the PC software and open the selection DISPLAY,
position „Display instantaneous values".
Using the mouse cursor select the entry that you have created
under "Unit identifier". A window is then opened displaying the
actual values of individual channels.

9.2 Read out and display measured values

The values stored in the data-logger can be transferred to the
PC using the RS 232 interface.
If you want to delete the values from the data-logger go to
READ OUT position „Read out measured values using
interface/modem".
Using the mouse cursor select the entry that you have created
under "Unit identifier". Transmission is started. Please take note
of the information text displayed on screen.
Once data has been transmitted to the PC data base the
measured values can be displayed either graphically or in
tabular form. To select this go to menu point DISPLAY, position
„Display values from data base".

9.3 Export measured values

Using the function export measured values data can be
transferred to spread sheets, e.g. MS Excel, for further
calculation. Click menu point MISCELLANDEOUS, position
„Export measured values" and select the required data-logger.
Once the details for SELECTION, MEASURED VALUES;
FORMATTING have been entered acknowledge the entry using
„OK". Enter the filename under which the exported data is to be
saved and acknowledge with „OK".
46