Model Variants - Bosch AEC-PANEL19-UPS Installationshandbuch

AEC-PANEL19 - Installation manual

Model variants

Two 19" mounting plate models are available for rack mounting
the AMC2. Choose the variant which best suits your purposes
based on the following considerations:
Choose mounting plate AEC-PANEL19-UPS (Order-No.:
F.01U.066.193) if you wish to supply power using the PBC-60 or
up to 2 rechargeable batteries. This variant comes with a cable
kit which provides pre-mounted partial wiring for power
supplies.
Choose mounting plate AEC-PANEL19-4DR (Order-No.:
F.01U.066.194) if your power supply is external. In this case the
rack mounting can hold up to 4 AMC devices in any combination
- for example:
-
-
-
-
-
This installation guide concerns itself primarily with the power
supply variant (-UPS) before briefly treating the 4-DIN rail (-
4DR) variant.
Bosch Sicherheitssysteme GmbH
four AMC2s
three AMC2s with one Extension board
two AMC2s with two Extension boards
one AMC2 with three Extension boards
four Extension boards
F.01U.097.256 | V 1.1 | 2008.12
en 5