Replacing The Dsc Sensor Prowirl 200; Replacing The Dsc Sensor In Prowirl D, F, R (Volume Flow, High/Low Temperature Or Mass Flow (Integrated Temperature Measurement)) And Seal - Endress+Hauser Prowirl 72 Einbauanleitung

12

Replacing the DSC sensor Prowirl 200

12.1 Replacing the DSC sensor in Prowirl D, F, R (volume flow, basis)
and seal
Proceed as described in Section 11.1 →  18 or in Section 11.2 →  20 and in the pictures
below.
1 →
2.
4 mm
1.
12.2 Replacing the DSC sensor in Prowirl D, F, R (volume flow,
high/low temperature or mass flow (integrated temperature
measurement)) and seal
Proceed as described in Section 11.1 →  18 or in Section 11.2 →  20 and in the pictures
below.
1 →
4 mm
Endress+Hauser
2
4 mm
1.
2
4 mm
1.
2.
3.
2.
3.
EA01085D
21