Inserting And Removing The Battery; Operating; Inserting / Replacing Tools - Westfalia 81 13 65 Bedienungsanleitung

Note: Allow the charger to cool down for 40 minutes after charging.

Inserting and Removing the Battery

1. Insert the battery (6) into the battery slot at
the bottom side of the cordless impact
wrench and connect the terminals of the
battery and the cordless impact wrench.
2. When inserting the battery, make sure it can
be easily placed. Do not use force.
Push the battery as far as it will go until the
locking clips (7) audibly snap in.
3. For removing the battery, press both locking
clips simultaneously and remove the battery
out of the machine.

Operating

Use the impact wrench for unscrewing of bolts and nuts. The impact wrench
creates a high maximum torque of up to 350 Nm by means of pulse ("beaten")
rotational movements.
Press the ON/OFF trigger (4) to turn the impact wrench on. Release the trigger
to turn off the unit.
Use the rotating direction button (3) to reverse the rotating direction of the tool.
In the middle position the ON/OFF trigger is locked. Set the rotating direction
button to this position when laying down the machine to avoid an unintentional
start-up.
Note: The rotating direction button can only be pressed, when the ON/OFF
trigger has been released.

Inserting / Replacing Tools

The cordless impact wrench features a ½" square drive (1). That means you
can use it with tools that have a ½" square entry.
Please note! Before changing the tool bit, set the rotating direction button (3)
into the middle position to avoid unintentional start-up.
Firmly push the desired tool bit onto the square drive, so that it can not loosen
when working.
Operating
10