Hints Regarding Usage; Maintenance And Care; Storing - Westfalia 82 78 68 Originalanleitung

4. Disconnect the impact wrench from power mains when exchanging the socket,
when not using the unit, after finished working and when applying mainte-
nance work.

Hints regarding Usage

 Use the impact wrench for screwing on and unscrewing of bolts and nuts. The
impact wrench creates a high maximum torque of up to 300 Nm by means of
pulse ("beaten") rotational movements.
 When screwing in bolts and screws, first turn them on the thread by hand for a
few turns, so that inadvertent tilting is prevented.
 Always start working with low revolutions. Make sure not to over tighten the
bolts and nuts!
 For safety reasons, the torque limit for screwing in bolts is set to 100 Nm.
When tightening wheel's bolts use a torque wrench with a torque of approx.
120 Nm to tighten the bolts. After driving for about 50 km check, whether the
bolts have to be re-tightened.
 Please note that oil, dirt, rust corrosion or other foreign particles on the threads
or under the head of the fasteners will affect the tightness.

Maintenance and Care

 If necessary, clean the impact wrench and the accessory with a moist cloth.
 Do not use abrasive or aggressive chemicals as benzene or thinner for
cleaning.
 Do not allow liquids to enter the tool and never immerse it into liquids.

Storing

 After use put the impact wrench and the accessory into the transport box into
the intended slots.
 Store all parts of the set in a dry place that is protected from dust, dirt and
extreme temperatures. Store the set out of reach of children.
Operation
10