Intended Use; Before First Use; Charging The Battery - Westfalia 81 13 65 Bedienungsanleitung

Intended Use

The cordless impact wrench with an appropriate tool has been exclusively
designed for loosening screws, bolts and nuts, etc. in the workshop, in
agricultural vehicles, equipment and machinery.
The intended use also includes an operation following the operating
instructions.
Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks and
is regarded as use that is contrary to the intended purpose.

Before first Use

Remove the cordless impact wrench and all accessories out of the packaging.
Check all parts for damage in transit and do not use damaged accessory or a
damaged tool.
Keep packaging materials out of reach of children. There is risk of suffocation!

Charging the Battery

A new battery
performance after several charge/discharge
cycles. The battery is equipped with a
temperature monitoring
supervises the charging process. The charger
will only work in a battery temperature lower
than 40°C.
1. To separate the battery (6) from the impact
wrench, first set the rotating direction button
(3) to the middle position (locked).
2. Now press both locking clips (7) simultaneously and pull out the battery.
3. Make sure that the power mains voltage in your area corresponds to the
operating voltage stated on the type label of the charger. Connect the power
cable of the charger to a wall socket.
4. Insert the battery into the battery slot (10) of the charger (9) until it audibly
snaps in place. The power LED (13) now lights up green.
5. Press the charging key (12) to start the charging process.
6. During the charging process the charging LED (11) shines red. The charging
process takes approximately one hour. At the end of the charging process the
charging LED turn off and the power LED shines green.
Operating
will only reach
device,
its full
which
9