Notes; Cleaning And Maintenance - Westfalia 40 32 20 Bedienungsanleitung

the air pressure according to the parameters supplied with the material
to be processed and according to the technical data sheet.
4. Pay attention to the air hose while operating the air wash gun. Hold the
hose with one hand while you are operating the air wash gun with the
other hand. The hose must not be bent and do not step on it.
5. Press the trigger (4) to operate the air wash gun and to distribute the
spraying material. Release the trigger to stop working.
6. Turn the adjusting nut (2) clockwise or counter clockwise to change the
spraying strength and to adjust it according to the respective
application.

Notes


Perform test runs on some test pieces. This way you can determine the
optimum spraying strength resp. the different jet adjustments.

Increase the distance to the object to be sprayed in order to achieve a
wider atomisation when spraying. By doing so, a more evenly spraying
result can be obtained.

Keep the suction opening clean at all times.

Do not process any abrasive, acid and fuel-containing materials.

Only use solvent-resistant and pressure-resistant air hoses (min. 10
bar).

Cleaning and Maintenance


To ensure proper functionality and a long lifetime, diligent maintenance
is essential.

Before cleaning or maintaining, first disconnect the air wash gun from
the air supply.

Depending on the sprayed material, rinse the air wash gun with thinner
or cleaning agents after use. By spraying a small amount of detergent,
the used suction hose, the nozzle and the spraying tube can be
cleaned from inside.

Do not use abrasive or aggressive chemicals such as benzene or
thinner to clean the housing of the tool which may dissolve plastic
parts.
Operation
14