Dust Extraction; Maintenance And Cleaning - Westfalia M1R-KZ2-8 Bedienungsanleitung

Dust Extraction

Inhalation of wood dust is dangerous to your health. Wear a dusk mask and
always work with dust extraction system.
Keep the dust extraction opening behind the milling cutter. So you have better
view look on the work piece.
1. Unscrew the machine clamp
screw (4) and remove the
machine out of the base
plate.
2. Remove the collet nut (6).
3. Remove the locking bolt for
parallel guide (9) out off the
base plate.
4. Mount the dust extraction
(B) with the included screws
(A) into the opening (C) on
the base plate.
5. Secure the locking bolts for parallel guide (9) on the base plate (7) again.
6. Place the machine on the base plate and secure the machine clamp screw
(4).
7. Mount the collet nut (6) onto the machine.
8. Connect the suction hose of your vacuum cleaner with the flange of the
dust extraction adaptor.

Maintenance and Cleaning

Do not use abrasives or aggressive chemicals such as benzene to clean the
Cleaning and Maintenance
Operation
4
A
C
13
9
7
B