Intended Use; Unpacking Your Tool; Before Use; Setting Up The Battery Charger - Westfalia ASSG 18 Originalbetriebsanleitung

Intended Use

Battery operated general-purpose reciprocating saw for work on wood,
metal and plastics.

Unpacking Your Tool

 Carefully unpack and inspect your reciprocating saw. Familiarise
yourself with all its features and functions.
 Ensure that all parts of the tool are present and in good condition. If
any parts are missing or damaged, have such parts replaced before
attempting to use this tool.

Before Use

Please note that that battery and charger are not included with the
tool.
Removing the Battery
To remove the battery (10) from the reciprocating saw, press the
battery release button (11), then slide the battery off the hand grip (8).
WARNING: Do not try to remove the battery without pressing the
battery release button. The reciprocating saw or battery could be
damaged.
Fitting a battery
To fit a charged battery, slide it on to the hand grip (8) of the reciprocat-
ing saw until it clicks and locks into position.
Note: Make sure the battery and reciprocating saw are lined up
correctly. If the battery does not slide into the reciprocating saw easily,
don't force it. Instead, slide the battery out of the reciprocating saw
again, check the top of battery and the reciprocating saw battery slot
are clean and undamaged and that the contacts are not bent.

Setting up the Battery Charger

(Battery and Charger not included)
1. If fitted, remove any battery from the battery charger.
2. Insert the battery charger mains plug into a suitable mains socket.
Operation
20