Safety Notes - Westfalia RBG 125 C Bedienungsanleitung

Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
Wear personal protective equipment. Always wear safety goggles to
prevent your eyes when using the double grinder.
Do not use damaged grinding wheels. Check the wheels for cracks and
other damage before each use.
Grinding wheels, flanges, discs and other accessories must fit precisely
the shaft of the grinder. Tools which do not fit precisely the shaft vibrate
and may cause loss of control.
The permitted speed of the tool must be at least equal to the overspeed of
the power tool. Accessories which rotate faster than permitted may be
destroyed.
Diameter and thickness of the grinding wheels must conform to the
requirements of your power tool. Wheels of the wrong size cannot be
shielded or controlled.
Use only grinding wheels which conform to the technical data in this
manual and on the wheels.
Regularly confirm whether the spark deflector and the work piece support
are not further than 2 mm away from the grinding wheel. If necessary,
readjust the spark deflector and the work piece support.
The grinding wheels will rotate for some time after the engine has been
turned off. Never try to stop the wheels by hand.
Wear suitable clothing when using the grinder. Synthetic materials may be
damaged by flying sparks. Tight clothing will not get caught in moving
parts easily.
It is advisable to bolt the grinder to a work bench. In the foot of the grinder
are two slots, with which the grinder can be mounted.
Keep other people out of the immediate working area. All persons in the
working area must wear personal protective equipment. Fragments of the
work piece or the grinding disc may fly off and leave the immediate work-
ing area and cause injuries or damages.
Keep the power cable away from rotating parts.
Do not use this tool close to combustible materials. These materials may
be ignited by flying sparks.
Do not disassemble the unit and do not try to repair it yourself. In the case
of questions or problems please turn to our customer support department.

Safety Notes

10