External Dvd Drive - Bosch DCU 100 Betriebsanleitung

en 18 | DCU 100 | Product description
1
3
Fig. 3: Underside of DCU 100
1 Pen
2 Stand
3 Battery fastening sleeves
4 Battery compartment
3.4.2 Functions of On/Off button
DCU 100 Power supply
unit
Off Not connected Off
Off Connected
On and LCD Connected
on
On and LCD Not connected Green light
off
On and LCD Not connected Flashing
off
On, LCD off, Not connected Flashing
in energy
saving mode
On, LCD off, Not connected Flashing
in energy
saving mode
i
Briefly pressing the On/Off button sets the DCU 100 to
standby mode or ends standby mode as applicable.
i
Pressing the On/Off button
down the Windows operating system and switches
off the DCU 100.
i
Pressing the On/Off button
switches off the DCU 100 without first shutting
down the operating system. This mode should only
be used if shutdown of the Windows operating sys-
tem is not possible.
|
1 689 989 174 2015-03-25
2
3
4
with LED
Status
LED
–
Green light Battery charge
≥ 80%
Yellow light Battery charge
< 80%
Off Battery being
charged
Battery charge
≥ 10%
Battery charge
red
< 10%
Battery charge
green ≥ 10%
Battery charge
red < 10%
for > 2 seconds shuts
for > 12 seconds
3.4.3 Function key ƒ
Pressing the function key ƒ opens or closes the start
menu and task bar of WIN 7 as applicable.
i
Pressing the function key ƒ for > 2 seconds opens or
closes the virtual keypad as applicable.
3.5 Touch screen
The touch screen can be operated by hand or using a
pen. To implement an action, touch the appropriate
point on the touch screen with a finger or pen.
i
Touch screen calibration is described in Sec. 5.8.2.
3.6

External DVD drive

Operation of the DVD drive is described in Sec. 5.11.
Robert Bosch GmbH