Automatic Operation; D) Operation With Fixed Colour Settings; E) Sound-To-Light Mode; F) Operation With Pedal Switch - Conrad 1302513 Bedienungsanleitung

Ob-3 mode
DMX channel Value
1 000-255
2 000-255
3 000-255
c) Automatic operation
In this operating mode, the LED light system is operated with 12 predefined programmes (AP01-AP12).
• Select the desired programme AP01 to AP12 in the menu.
• Set the desired programme speed with F-00 to F-08 (F-00 = Light off).

d) Operation with fixed colour settings

In this operating mode, a fixed colour setting is performed.
• Select coLo in the menu.
• Define the desired mixed colour by setting the colour intensities of the individual LEDs as follows:
r-00 to r-08 Intensity red
G-00 to G-08 Intensity green
b-00 to b-08 Intensity blue
• Set the desired strobe speed with F-00 to F-08 (F-00 = Strobe off).

e) Sound-to-Light mode

In this operating mode, the effect light is controlled via the installed microphone (3) in time to the music.
• Select the desired programme SP00 to SP03 in the menu Soun.
• Set the desired microphone sensitivity with the controller MICROPHONE SENSITIVITY (2).
☞
The light effect should change in time with the music here.

f) Operation with pedal switch

• Push the pedal switch BLACKOUT to switch off all LED spots. The LED display (7) shows OFF.
• Push the pedal switch BLACKOUT again to switch on all LED spots again. The LED display (7) shows APon.
• Push the pedal switch PROGRAMS several times to call the different automatic programmes and light colours in
sequence:
APon > AP01 to AP12 > ALL (all internal programmes in sequence)
Under APon, the following colours appear in sequence: red > green > blue > yellow > light blue > magenta > white
32
Function
LED-Spot 1-4 / brightness red 0-100%
LED-Spot 1 / brightness green 0-100%
LED-Spot 1 / brightness blue 0-100%