B) Dmx Mode And Ob-3 Mode - Conrad 1302513 Bedienungsanleitung

Overview of the setting options in the menu
Display Option
A001 A001 - A512
AP01 AP01 - AP12
F-00 - F-08
coLo r-00 - r-08
G-00 - G-08
b-00 - b-08
F-00 - F-08
Soun SP00 - SP03
Ob-3
☞
Ob-3 is a simplified DMX operating mode where three DMX channels only need to set the brightness of
the 3 basic colours (red, green and blue).

b) DMX mode and Ob-3 mode

Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identified by the controller.
This DMX starting address specifies the first DMX channel to which the effect light responds. The remaining control
channels come after this first DMX channel (DMX starting address).
☞
The effect light requires either 15 or 3 (Ob-3 operation) free DMX channels depending on DMX operating
mode.
Setting the DMX start address for the DMX operating mode
• Set the desired DMX starting address in menu A001 (A001 - A512) when you want to use the device in 15-channel
DMX mode.
• Set Ob-3 in the menu if you want to use the device in simplified Ob-3 mode.
30
Function
DMX starting address
Automatic mode/programme selection
Automatic mode/programme speed
Static colour settings/brightness red
Static colour settings/brightness green
Static colour settings/brightness blue
Static colour settings/strobe speed
4 Sound-to-light programmes
Ob-3-mode with 3-DMX-channels
CH1 = Brightness red
CH2 = Brightness green
CH3 = Brightness blue