Klarstein AQUALINE Bedienungsanleitung Seite 21

MAINTENANCE
Troubleshooting
If your device fails, please refer to the help information in the table below first. If
the problem cannot be solved, please contact the local maintenance department.
Problem
The machine cannot produce water.
The water flow has decreased.
The water does not taste good.
The water does not taste good.
The hot water does not reach the
specified temperature.
Leakage current and induced current
of machine body.
The device cannot generate heat.
Solution
Check if the water tank is filled with
water.
Check if the filter element is blocked
by too much contamination.
Check whether the filter element is too
dirty or has exceeded its service life.
Check that the filter element does not
need to be replaced after the service
life has been exceeded.
1. Check whether parts of the machine
have been dismantled without
permission.
2. Check whether the parts are
screwed tightly at the seepage point,
whether the teeth are offset or
whether they are sliding.
3. Check whether the silicone sealing
ring at the leaking point is aged or
damaged.
1. Too much hot water has been
consumed in a short period of time.
2. Power is off.
The machine is badly grounded.
1. Check whether the power is on.
2. The thermostat protection on the
heating bucket will not reset.
Contact the customer service or a
repair service.
EN
21