Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Thermo Hygrometer with Date, Time, and Timer
Item no: 2865713
1 Intended use
The product is a digital thermo hygrometer with date, time, and countdown timer. It has
touch button controls and can be mounted using the integrated stand, screw hook, or suction
cup.
Notes:
– The product has an IP54 ingress protection rating.
– The product is protected against light splashes of water from all directions. Do not sub-
merge!
– The product can be used in a bathroom but should not be mounted under a shower or
over a bathtub.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Product
■
Suction cup
■
Operating instructions
3 Latest product information
Download the latest product information at
code shown. Follow the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from direct sunlight.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
3
www.conrad.com/downloads
or scan the QR
5.5 Batteries
■
Correct polarity must be observed while inserting batteries.
■
The batteries should be removed from the device if it is not used for a long period of time
to avoid damage through leaking. Leaking or damaged batteries might cause acid burns
when in contact with skin, therefore use suitable protective gloves to handle corrupted
batteries.
■
Batteries must be kept out of reach of children. Do not leave batteries lying around, as
there is risk, that children or pets swallow them.
■
All batteries should be replaced at the same time. Mixing old and new batteries in the
device can lead to battery leakage and device damage.
■
Batteries must not be dismantled, short-circuited or thrown into fire. Never recharge non-
rechargeable batteries. There is a risk of explosion!
6 Product overview
1
2
3
9
10
12
13
14
1
Month / day
3
Timer: 10 min. increment
5
Battery compartment
7
Humidity level
9
Timer: clear / exit
11
Settings panel
13
Wall hang / suction mount
15
Battery cover lock marking
17
Suction cup
7 Insert / remove batteries
1. Remove the battery compartment cover.
2. Insert batteries matching the polarity markings.
3. Replace the battery compartment cover.
Note:
Replace batteries when the low battery icon shows on the display.
8 Settings
8.1 Date / time setting
The settings buttons are inside the battery compartment.
1. Press and hold the TIME button until it flashes.
2. Press UP or DOWNto change values.
3. Press the TIME button to save the setting and move onto the next.
à
The settings sequence is: year → month → day → hour → minute → exit
4. After exiting settings, press the TIME button to switch between 12/24 hr time format.
8.2 Temperature unit
Press the CF button to switch between temperature measurement units: Centigrade (°C) /
Fahrenheit (°F).
4
5
6
7
8
11
15
17
16
2
Countdown interval
4
Current time
6
Temperature
8
Timer: 1 min. increment
10
See:
Humidity index [} 4]
12
Speaker
14
Thermo hygro sensor
16
Fold-out stand
Werbung
