Herunterladen Diese Seite drucken

Bosch GCL 2-15 G Professional Originalbetriebsanleitung Seite 18

Vorschau ausblenden Andere Handbücher für GCL 2-15 G Professional:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
18 | English
Point and line laser
– Laser points
Typical self-levelling range
Typical levelling time
Operating temperature
Storage temperature
Max. altitude
Max. relative humidity
Pollution degree according IEC
61010-1
Laser class
Laser line
– Laser type
– Colour of the laser beam
– C
6
– Divergence
Laser point
– Laser type
– Colour of the laser beam
– C
6
– Divergence
Tripod mount
Batteries
Operating duration in operating mode
– Cross-line and point mode
– Cross-line mode
– Line and point mode
– Line mode
– Point mode
Weight according to
EPTA-Procedure 01:2014
Dimensions (length × width × height)
– without rotating mount
– with rotating mount
Protection rating
A) The working range may be reduced by unfavourable environmental conditions (e.g. direct sunlight).
B) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is expected.
The serial number (12) on the type plate is used to clearly identify your measuring tool.
Assembly
Inserting/Changing the batteries
It is recommended that you use alkaline manganese batter-
ies to operate the measuring tool.
To open the battery compartment cover (6), press the lock-
ing mechanism (7) and lift open the battery compartment
cover. Insert the batteries.
1 609 92A 7L7 | (08.06.2022)
GCL 2-15
±0.7 mm/m
±4°
<4 s
−10 °C to +50 °C
−20 °C to +70 °C
2000 m
90 %
B)
2
2
630–650 nm, <1 mW
Red
1
0.5 mrad (full angle)
630–650 nm, <1 mW
Red
1
0.8 mrad (full angle)
1/4", 5/8"
3 × 1.5 V LR6 (AA)
6 h
8 h
12 h
16 h
22 h
0.49 kg
112 × 55 × 106 mm
132 × 81 × 163 mm
IP 54 (dust and splash-proof)
When inserting the batteries, ensure that the polarity is cor-
rect according to the illustration on the inside of the battery
compartment.
If the batteries become weak, the battery warning
indicator (2) will flash green. The laser lines will also flash for
approximately five seconds every ten minutes. The measur-
ing tool can still be operated for approximately one hour
after the first flash. If the batteries drain completely, the
laser lines will flash one more time just before automatic
shut-off.
GCL 2-15 G
±0.7 mm/m
±4°
<4 s
−10 °C to +50 °C
−20 °C to +70 °C
2000 m
90 %
B)
2
2
500–540 nm, <10 mW
Green
10
50 × 10 mrad (full angle)
630–650 nm, <1 mW
Red
1
0.8 mrad (full angle)
1/4", 5/8"
3 × 1.5 V LR6 (AA)
6 h
8 h
10 h
12 h
22 h
0.49 kg
112 × 55 × 106 mm
132 × 81 × 163 mm
IP 54 (dust and splash-proof)
Bosch Power Tools

Werbung

loading

Diese Anleitung auch für:

Gcl 2-15 professional