Disposal; What If There Are Problems; Technical Specifications - Beurer TL 70 Gebrauchsanweisung

9. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful
life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accord-
ance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions,
please contact the local authorities responsible for waste disposal.

10. What if there are problems?

Problem Possible cause
Device does not On/off button switched off
light up
No electricity
No electricity
LEDs have reached the end of their service life.
LEDs faulty.

11. Technical specifications

Model no.
Dimensions (WHD)
Weight
Lighting elements
White wavelength
Maximum light output
Power
Light intensity
Operating conditions
Storage conditions
Product classification
Color temperature of LEDs
Included in delivery
Subject to technical modifications.
The serial number is located on the device or in the battery compartment.
This device meets the requirements of the European Directive 93/42/EEC and 2007/47/EC Medical Devices as-
well as the Medical Devices Act.
Notes on electromagnetic compatibility
The device complies with the EU Medical Devices Directive 93/42/EEC (therapy setting), the German Medical
Devices Act (Medizinproduktgesetz) and the European standard EN 60601-1-2 (in accordance with CISPR-11,
IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6,
IEC 61000-4-8, IEC 61000-4-11) and is subject to particular precautions with regard to electromagnetic
compatibility.
• The device is suitable for use in all environments listed in these instructions for use, including domestic envi-
ronments.
TL 70
366 x 335 x 203 mm
1130 g (1240 g incl. mains adapter)
LED
410 - 800 nm
14.83 mW/m²
36 Watts
10.000 lux (Distance: approx. 10 cm)
+5°C to +35°C, 15 - 90% relative humidity
atmospheric pressure range 86-106 kpa
-20 °C to +50 °C, 15 - 90% relative humidity
atmospheric pressure range 86-106 kpa
External power supply, Protection class II, IP21
5.300 Kelvin (+/- 300 K)
Daylight therapy lamp, Mains part, These operating instructions
15
Solution
Switch on the on/off button.
Connect the mains part properly.
The mains part is faulty. Contact cus-
tomer services or your retailer.
If you need to have the unit repaired,
contact customer service or an authori-
sed dealer.