Starting Up The Appliance - hanseatic HEKS8854G4E Gebrauchsanleitung

Page EN-30 Installing the appliance and reversing the appliance door
7. To install the freezer compartment door
on the other side, turn it around by 180°.
8. Insert the freezer compartment door with
the upper door pin into the opening at the
top of the freezer compartment.
(23)
9. Place the hinge on the lower door pin and
screw it securely to the appliance using
the hinge screw (23).
Make sure that the locking tappet screw
hole is placed exactly over the markings
in the appliance wall.
10. Cover the holes left by unscrewing the
bearing plate and locking tappet on the
opposite side of the freezer compartment
with the two round and the rectangular
cover stickers.
11. Close the freezer compartment door.

Starting up the appliance

NOTICE
Risk of damage!
If the cooling unit has been transport-
ed horizontally, lubricant from the com-
pressor may get into the cooling circuit.
■ Allow the appliance to stand upright
for approx. 2 hours after transport
and before connecting.
Risk of damage!
Improper handling of the appliance
can lead to damage to property.
■ The interior light must be used only
to illuminate the interior of the appli-
ance. It is not suitable for lighting a
room.
• Switch off the fuse for the mains socket
to which the refrigerator is connected.
The interior light (10) comes on when the
appliance door is open.
The appliance is switched on.