Page EN-28
Start-up
Starting up the appliance
NOTICE
Risk of damage!
If the appliance has been transported
horizontally, lubricant from the com-
pressor may get into the cooling circuit.
■ Allow the appliance to stand upright
for approx. 2 hours after transport
and before connecting.
Risk of damage!
Improper handling of the appliance
can lead to damage to property.
■ The interior light must be used only
to illuminate the interior of the appli-
ance. It is not suitable for lighting a
room.
•
Insert the mains plug into an easily ac-
cessible and properly installed socket
(220–240 V~ / 50 Hz).