Quick Choice Menu - Selco WF 110 S Betriebsanweisung

- The program or the synergic curve retrieved
1d
Program retrieved
Synergic curve retrieved
Process retrieved
1e Number of the program/synergic curve retrieved
- The real current and voltage values during the welding
phases
1f Current reading
1g Voltage reading
2 Welding parameters
Select the required parameter by pressing the encoder but-
ton.
Adjust the value of the selected parameter by rotating the
encoder.
2a Parameter selection bars
2b Parameter icon
2c Parameter value
2d Unit of measurement of the parameter
PROCESS PARAMETER 1
MMA
ARC AIR
MIG/MAG
The parameters of the main screen can be personalised (consult
the "Interface personalisation" section).
3

3.7 Quick choice menu

Allows the selection and regulation of the most commonly used
welding parameters.
PARAMETER 2
Enter the quick choice menu by pressing button (1)
Functions
Allow the setting of the most important process func-
tions and welding methods.
3a
Allows access to the quick choice menu (and
exit from it) - (consult the "Quick choice menu"
section)
3b Allows the selection of the welding process
MMA
ARC AIR
MIG/MAG
3c Allows the selection of the welding method
2 Stages
4 Stages
Crater filler
Spot welding
Pause point
3d
Gas test
.
33