Programs Screen - Selco WF 110 S Betriebsanweisung

2 Synergic curves
0,8
MANUAL
Fe CO2
1
Fe Ar20%CO2
5
Ss Ar 2%CO2
9
SS Ar 2%O2
13
Al Ar
-
AlSi Ar
25
AlMg Ar
29
CuAl Ar
33
CuSi Ar
-
MCWFe Ar 20%CO2
-
BFCWFe Ar 20%CO2
-
RCWFe Ar 20%CO2
-
FCWSs Ar 20% CO2
-
Program not valid
Indicates that the synergic curve selected is unavailable or is not
coherent with the other system settings.
Allows a new synergic curve to be selected by rotating the
encoder.

3.10 Programs screen

1 General
Allows the storage and management of 50 welding pro-
grams which can be personalised by the operator.
Enter the quick choice menu by pressing button (1)
.
Enter the program management screen by pressing but-
ton (3) .
Ø (mm)
0,9 1,0 1,2 1,4 1,6
Off (0)
- 2 3 -
- 6 7 -
- 10 11 - 12
- 14 15 -
- 22 23 - 24
- 26 27 -
28
- 30 31 - 32
- 34 35 - 36
- 38 - -
- - 43 44 45
- - 48 49 50
- - 53 54 55
57 - 59 - 60
4
8
-
3a Parameter selection bars
3b Number of the selected program
-
3c Process of the selected program
3d Main parameters of the selected program
3e Description of the selected program
2 Program storage
Select the required program (or the empty memory) by
rotating the encoder.
Save all the current settings on the selected program by
pressing button (1)
Confirm the change made by pressing button (1)
Cancel the operation by pressing button (4)
Introduce a description of the program.
- Select the required letter by rotating the encoder.
- Store the selected letter by pressing the encoder.
.
.
37
.