Securing Child; Using In The Forward Facing Mode - Joie i-Spin XL Anleitung

Securing Child

1. To lengthen the shoulder harness belts, press the harness
adjustment button while pulling out the shoulder harnesses to
loosen.
19
2. Unlock the buckle of the harnesses by pressing the red button.
3. Place the buckle tongues against the magnetic area on the outer
side of the enhanced child restraint so that the tongues are held in
place. 21
Use Infant Insert
We recommend using the full
infant insert while the baby
is under 60cm and can be Remove the infant insert cushion by detaching the snaps to allow
more pace when the infant does not fit comfortably. The cushion
used until they outgrow the
can be used separately without being attached to the insert to
infant insert. The infant insert
increases side impact
protection.
4. Place the child into the enhanced child restraint and pass both arms
through the harnesses.
5. Engage the buckle. Please refer to
6. Pull down the adjustment webbing and adjust it to the proper length
to make sure your child is properly secured.
!
Always keep child secured in harness and properly tightened by
removing any slack.
!
Make sure the space between the child and the shoulder harness
straps is about the thickness of one hand.
11
1
2
bolster the infant's back for more comfort.
22
23
!
When the seat is rotated in place and properly engaged, rotation
button will show green; otherwise it will show red.
!
Always make sure the seat is in locked position (rearward facing /
forward facing) even when the child is not in it.
20

Using in the forward facing mode

(Child height 76cm-105cm/Child weight
18kg/15 months - 4 years old)
see images
!
Install the enhanced child restraint on the rear vehicle seat,
and then place the child in the enhanced child restraint.
Press the rotation button to rotate for easier side loading/unloading of
the child, then rotate the seat to the forward facing position.
!
Press the rotation button on either side to rotate the enhanced child
restraint.
Securing Child
1. To lengthen the shoulder harness belts, press the harness
adjustment button while pulling out the shoulder harnesses to
loosen.
27
2. Unlock the buckle of the harnesses by pressing the red button.
!
Remove the infant insert when in forward facing mode.
3. Place the buckle tongues against the magnetic area on the outer
side of the enhanced child restraint so that the tongues are held in
place.
4. Place the child into the enhanced child restraint and pass both arms
through the harnesses.
5. Engage the buckle.
6. Pull down the adjustment webbing and adjust it to the proper length
to make sure your child is properly secured.
7. Press the swivel lock off button
forward facing mode.
-
25 32
-1 while you rotate the seat to the
31
-2
31
24
25 & 26
28
29
30
12