The Isofix Connectors Must Be; Attached And Locked Onto The; Isofix Anchor Points; The Load Leg Must Be Installed - Joie spin 360 GTi Bedienungsanleitung

!

The ISOFIX connectors must be

attached and locked onto the

ISOFIX anchor points.

23
!

The load leg must be installed

correctly with green indicator.
23 -2

Securing Child

After the child is placed into the
seat, check whether the Shoulder
Harness Straps are at proper height.
1. Press the webbing adjustment
button, while pulling out the
shoulder harnesses to the proper

length.

24
2. Unlock the buckle of the
harnesses by pressing the red
button.
25
13
23
-1
1
24
25
3. Fix the buckles on the both sides
of seat to make placing the child
in rear facing mode more
convenient.
26
2
4. Use infant insert is for children's
protection.
27
We recommend using the full
infant insert while the baby
is under 60cm and can be
used until they outgrow the
infant insert. The infant insert
increases side impact
protection.
26
27
Remove the head support
insert when the child's
Detach the snaps on
insert when the infant's
the head support to
shoulders no longer fit
remove the head
portion of the insert.
Remove the infant insert
1
cushion by detaching the
snaps to allow more space
when the infant does not
fit comfortably. The cushion
can be used separately
2
without being attached to
the insert to bolster the
infant's back for more
portion of the infant
head no longer fits
comfortably.
Remove the body
portion of the infant
comfortably.
comfort.
14