Height Adjustment; Using In The Rear Facing Mode - Joie spin 360 GTi Bedienungsanleitung

Height Adjustment

for Head Support and Shoulder Harnesses
see images -
17 19
1. Please adjust the head support
and check if the shoulder
harnesses are at the correct
height according to
17
!
When used rear facing, the
shoulder harness height must be
even with child's shoulders.
!
When used forward facing, the
shoulder harness height must be
even with child's shoulders.
2. Lift up the head support
adjustment lever 18 , meanwhile
pull up or push down on the head
support until it snaps into one of
the 6 positions. The head support
positions are shown as
19
11
17
17
17
18
.
19

Using in the Rear Facing Mode

(Child height 40cm-105cm/Child weight 19.5kg/
infant - 4 years old)
see images -
3 9
!
Please install the child restraint on
the rear vehicle seat, and then put
the child in the child restraint.
see images -
20 29
1. Press the ISOFIX adjuster button
-1 and pull the base back from
20
the vehicle seat.
2. Press the rotating button to rotate
for easier side loading/unloading
of the child, then rotate back to
desired direction. &
21 23
3. If a tighter install or increased
cabin space is required, then
press the ISOFIX adjuster button
-1 and push to adjust.
22 22
20
2
21
22
2
-2
1
1
12