Entering Wheel Dimensions (Except For Alu1P And Alu2P Programmes) - Corghi ET 1450 Betriebsanleitung

ENTERING WHEEL DIMENSIONS (EXCEPT
FOR ALU1P AND ALU2P PROGRAMMES)
The machine allows for the diameter and distance
values to be entered automatically; the width value
can be entered using the keypad.
- Bring the automatic measuring arm into contact
with the inner side of the rim (fig.11).
Take great care to position the arm correctly so
as to ensure accurate data reading.
While moving the automatic arm, the distance
measured by the arm is shown on the display:
96
Operator's Manual ET 1450
11
12